Mine road network
National Service Hotline
029-85212477

Jiedeng supply STL60 centrifuge / water jacket centrifuge / sand gold recycling equipment

Click on the picture to see the original picture
brand: Jeddon
电机功率: 7.5KW
处理量: 30-60T/H
主轴转速: 400
Unit Price: 35000.00yuan/set
Start up: 1 set
Total supply volume: 1000 set
period for dispatch: From the date of the buyer's payment 3 Delivery within days
Location: Jiangxi Ganzhou City
Valid until: Long term effectiveness
Last update: 2019-04-17 11:14
Browse times: 847
purchase
Basic company information
 
 
Product Details
 Water jacket centrifuge
Product Overview:

The water jacketed centrifuge uses the traditional beneficiation centrifuge's beneficiation principle, and uniquely applies recoil pressure water on the inner surface of the beneficiation part to overcome the traditional centrifugal concentrator in the beneficiation process, due to the mineral layer compaction, leading to beneficiation Defects in the decline in tax rates. This new feature is achieved by a special way of adding a water jacket to the centrifuge.

   The ore dressing test proves that the heavy ore with more than 90mm of tin ore, lead ore, antimony ore, silver ore and gold ore with a particle size of less than 4mm can be recovered. The recovery rate of heavy ore can reach more than 90%; The recovery rate of heavy ore is over 92%.

Product structure and principle:

Working principle machine construction:

    The water jacket centrifugal concentrator is composed of a feed pipe, a frame, a tailings tank, a drive motor, a vertical shaft and a beneficiation part.

    The ore dressing components are divided into inner and outer layers. The inner layer is a cone-shaped cone. The inner layer of the vertebral body is made of stainless steel with a ring-shaped strip. The cone wall has many small holes. The outer layer is made of ordinary steel plate. The layers form a closed water jacket.

The middle transmission shaft is a hollow shaft, and the pressure water is fed into the water jacket formed by the inner and outer cones through the hollow shaft, and the inner layer small holes continuously spray water into the strips to form a recoil, and during the sorting process, the recoil water Pressure position: 0.03-0.06MPa.

The ore or sieved ore is fed into the ore dressing component from the upper part through the center feed pipe in the state of slurry. Under the centrifugal force of high-speed rotation, the slurry moves upward along the cone, and the light mineral is discharged from the upper periphery of the cone to the periphery. In the tailings trough, it is discharged from the tailings discharge port; heavy minerals are deposited between the bars under the action of centrifugal force, and are actually deposited on the inner cone.

 Through the results of the ore dressing test and years of production practice, the water jacketed centrifuge has a low failure rate, easy operation and easy maintenance.

    The application of this machine in the gold selection plant can replace the amalgamation operation, eliminate the harm of mercury to the human body, is conducive to environmental protection, and conforms to the national environmental protection policy, which has far-reaching significance.

The machine has the ability to recover monomer gold, especially the recovery effect of fine-grain monomer gold, and the technical index is superior to other re-election equipment. This is a major breakthrough in the development and development of centrifugal ore dressing equipment.

Compared with similar foreign products, the machine has low equipment cost and is easy to be promoted and applied in China, which is conducive to the improvement of mine economic benefits.

1. Belt drive 2. Motor 3. Equipment shell 4. Feed pipe 5.6mm thick stainless steel inner sleeve 6. Pressure water jacket

  7. Tailings discharge pipe 8. Damping device 9. Rack 10. Concentrate discharge port 11. Hollow shaft 12. Recoil pipe
The motor 2 drives the hollow shaft through the belt drive 1. The inner sleeve spacer 5 is rotated at a high speed, and the mineral material enters the inner sleeve compartment 5 through the feed pipe 4, and the mineral material is strengthened by the full sorting process under the centrifugal action, and the heavy mineral stays in the In the inner compartment 5, the light mineral is discharged through the tailings discharge pipe 7, and after one shift operation, the concentrate is discharged from the concentrate port 10 and then enters the next cycle operation.

The triangular hanging water jacket centrifuge is a new type of water jacket type gold centrifuge, which has a good selection effect on different gold deposits and rock gold tailings. The gold water jacket centrifuge is one of the modern re-election equipment. Due to its large processing capacity, it has a wide range of particle size, simple operation and maintenance, and is widely used as a rough selection or selection for gold, tin, tungsten, titanium, and red iron.

The gold water jacket centrifuge is an energy-saving middle-selection equipment developed and improved on the basis of the centrifugal force law based on the centrifugal force law, which alleviates the inhalation effect and makes the heavy ore particles in the minerals fully settle, greatly improving the equipment selection. Specific capacity and recovery rate, the recovery rate can reach more than 90.

 The work recovery rate is increased by Sn: 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04; water consumption is reduced by 30% - 40%, floor space is reduced by 1/3, and stroke can be adjusted, due to electromagnetic speed regulation The motor is adjusted to make the stepless adjustment. Its performance has reached the domestic advanced level and is one of the ideal energy-saving re-election equipments.

The application of this machine in the gold selection plant can replace the amalgamation operation, eliminate the harm of mercury to the human body, is conducive to environmental protection, and conforms to the national environmental protection policy, which has far-reaching significance.

Product application range:

Through the results of the ore dressing test and years of production practice, the water jacketed centrifuge has a low failure rate, easy operation and easy maintenance.

    The application of this machine in the gold selection plant can replace the amalgamation operation, eliminate the harm of mercury to the human body, is conducive to environmental protection, and conforms to the national environmental protection policy, which has far-reaching significance.

The machine has the ability to recover monomer gold, especially the recovery effect of fine-grain monomer gold, and the technical index is superior to other re-election equipment. This is a major breakthrough in the development and development of centrifugal ore dressing equipment.

Compared with similar foreign products, the machine has low cost and is easy to promote and apply in China, which is beneficial to the economic benefits of the mine.

Product specifications and technical parameters:

 

设备型号

STL 19

STL 30

STL 60

STL 80

STL 100

生产能力(T/h)

0.2-1

2-8

10-40

35-70

75-120

给矿颗粒(mm)

0-3

0-4

0-6

0-6

0-6

给矿浓度(%)

0-50%

0-50%

0-50%

0-50%

0-50%

反冲水量(T/h)

1.5-2

4-6

10-15

17-25

40-60

精矿产量(kg/次)

2-3

10-20

30-40

60-70

70-80

电机功率(kw)

0.75

1.5

4

11

18.5

圆锥转速

800

600

460

400

360

压力水Mpa

0.04

0.12

0.25

0.35

0.4

外形尺寸(mm)

790*785*790

1180*1140*1250

1970*1670*1750

2300*1800*2200

2500*2000*2400

设备重量(kg)

145

400

1300

1500

2000

 离心机现场1

 
More» Other products of our company

[ Device search ]  [ Join in collection ]  [ Tell your friends ]  [ Print this article ]  [ Illegal reporting ]  [ close window ]

Website Homepage

About Us

Contact

Use Agreement

Copyright privacy

Sitemap

Service Items

Member Service

Advertising Services

Website Message

Four Privileges

Payment Method

Apple APP Download
Android App Download
Mining Club
Contact Us

029-85212477

We are always waiting for your visit!

| ICP business license: Shaanxi ICP No. 15507745