Mine road network
National Service Hotline

Jiangxi Jiedeng Supply 300*500 sanding machine

Click on the picture to see the original picture
brand: Jeddon
电机功率: 18.5KW
处理量: 3-6T/H
给矿粒度: 《50mm
Unit Price: 7800.00yuan/set
Start up: 1 set
Total supply volume: 1000 set
period for dispatch: From the date of the buyer's payment 3 Delivery within days
Location: Jiangxi Ganzhou City
Valid until: Long term effectiveness
Last update: 2019-04-25 15:33
Browse times: 990
Basic company information
Product Details
 Sanding machine
Product Overview:

Sanding machine (crushing machine) is one of the ore dressing equipment for breaking ore. It can break the ore below 50 mm or the tailings and medium mines in the incomplete minerals, separate the useful metals from the ore, crush the ore in the range of 1~180 mesh according to the requirements of the concentrator, and then enter Shaker for sorting. It is suitable for small mines and to some extent replaces ball mills. Easy to install, easy to operate, less investment, quick results. Different sizes of screens can be used in the actual crushed ore, with a minimum of 2 mm.

Product structure and principle:

Sanding machine consists of: the rotor of the hammer (also known as the hammer), the rotor consists of the main shaft, the disc, the pin and the hammer, the motor or the diesel engine, and the base bracket.

Working principle of sanding machine:

The material enters the sand making machine from the feeding hopper, and the material is divided into two parts through the feeder, and a part is inserted into the high-speed rotating impeller from the middle of the distributor, and is rapidly accelerated in the impeller, and the acceleration can reach hundreds of times of gravity acceleration. Then, it is ejected from the three uniform flow channels of the impeller at a speed of 60-70 m/s. Firstly, it is impacted and broken by a part of the material falling from the periphery of the distributor, and then impacted together on the material lining in the vortex cavity. It is rebounded by the material lining, impacts obliquely upward to the top of the vortex chamber, changes its direction of motion, deflects downward, and the material emitted from the impeller runner forms a continuous material curtain.

A piece of material is subjected to two or even multiple chances of impact, friction and grinding and crushing in the vortex crushing chamber. The broken material is discharged from the lower discharge opening. It forms a closed circuit with the circulating screening system. Generally, the material can be broken into 20 mesh or less after three cycles.

During the whole crushing process, the materials are crushed and broken by themselves, and are not in direct contact with the metal components, but are impacted, rubbed and pulverized with the material lining, which reduces the angular pollution and prolongs the mechanical wear time. The ingenious airflow inside the vortex chamber self-circulates, eliminating dust pollution.

Job characteristics

1. The structure is simple and reasonable, and the running cost is low.

2. High breaking rate and energy saving.

3, with fine crushing, coarse grinding function.

4. It is affected by the moisture content of the material and the moisture content can reach 8%.

5. It is more suitable for crushing medium and hard materials.

6. The product has excellent grain shape and is cubic, and the content of the needle is extremely low.

7. Impeller self-lining wear is small and easy to maintain.

8, the working noise is less than 75 decibels (db level).

Product application range:

1. Artificial sand making of river pebble, rock (limestone, granite, basalt, diabase, andesite, etc.), ore tailings, and stone chips.

2. Production of building aggregates, highway road fabrics, cushion materials, asphalt concrete and cement concrete aggregates.

3. Mechanism sand production and stone shaping in water conservancy and hydropower, high-grade highways, expressways, high-speed railways, passenger dedicated lines, bridges, airport runways, municipal works, and high-rise buildings in the engineering field.

4. In the mining field, the fine crushing process in the front stage of grinding, materials in the building materials, metallurgy, chemical, mining, refractory materials, cement, abrasives and other industries are broken.

5, high abrasive and secondary disintegration and crushing, thermal power, metallurgical industry, sulfur removal, steel slag, construction waste crushing and other environmental protection projects.

6. Production of glass, quartz sand and other high purity materials.

Product specifications and technical parameters:





























More» Other products of our company

[ Device search ]  [ Join in collection ]  [ Tell your friends ]  [ Print this article ]  [ Illegal reporting ]  [ close window ]

Website Homepage

About Us


Use Agreement

Copyright privacy


Service Items

Member Service

Advertising Services

Website Message

Four Privileges

Payment Method

Apple APP Download
Android App Download
Mining Club
Contact Us


We are always waiting for your visit!

| ICP business license: Shaanxi ICP No. 15507745