Mine road network
National Service Hotline
current location: home » Tech » Mining tech » text

Shallow hole mining and mining method and its application

Release date:2018-09-27  source:中南选矿网  Browse times:1201
 Shallow hole mining and mining method and its application 2008-9-1013:54:45 China Mineral Processing Technology Network Browse 3903 Collections I have two sentences, shallow hole mining and mining method (1) Method characteristics Shallow hole mining and mining method The characteristic is that the stage is divided into ore blocks, and the ore blocks are further divided into mine houses and pillars for secondary recovery. The mining room is stratified and mining from top to bottom. Each time the ore that has collapsed is released about one-half, and the rest is stored in the mining room as a workbench to continue mining. After the mining room is finished, it is released, and the mining room is finished. Back to the mining column and processing the gob.
(II) Applicable conditions The shallow hole retaining ore mining method is mainly used to open ore bodies with stable ore and surrounding rock. It is generally suitable for medium-thick, thin or still thin ore bodies. The ore body inclination angle is generally required to be not less than 60° in thin veins. Generally, it is required to be not less than 55° in medium-thick ore bodies. The smaller the dip angle, the more difficult it is to mine, the greater the loss of silt mine and the workload of the field. Because of the large amount of ore stored in the mine, the ore and surrounding rock cannot be self-igniting, oxidizing and agglomerating.
(III) Components When the thickness of the ore body is less than 15m, the ore blocks are arranged along the strike. When the thickness of the ore body is greater than 15m, the ore blocks are arranged vertically. Divide the nuggets into mines and pillars, and then mine the post-mining pillars. The length of the nugget is 40 to 50 m and the height is 40 to 50 m. The height of the top column is 4m, the height of the bottom column is 6m, the width of the column is 6m, and the spacing between the links is 5.5-6.0m.
(4) The quasi-cutting and quasi-cutting work mainly includes excavating the middle section of the transportation lane, the patio and the patio connecting road, burrowing the bottoming alley on the bottom column and digging the funnel neck every 5~7m, cutting the bottom and forming the leak. Mining free surface. For the cutting work, the 7565 type air-leg rock drill is used for roadway excavation, and the YSP45 rock drill is used for the tunnel excavation. The mining roadway is generally unsupported, the local unstable section adopts wood support, and the extremely unstable zone adopts concrete reinforcement support.
(5) Mining work 1. Mining sequence: The mining work mainly includes rock drilling, blasting, ventilation, partial ore mining, dome flat field, and large amount of mining. Since the mining work is carried out from the bottom level from bottom to top, the layer height is generally 2.0 to 2.5 m. The mining site uses the 7655 air-leg rock drill to drill the upward micro-fronting blasting hole. The drilling blasting parameters are: the minimum resistance line is 1.0-1.2m, the blast hole spacing is 0.8-1.0m, and the hole depth is 1.8-2.2m. The front and rear rows of blastholes are staggered, using ammonium nitrate explosives for manual charging, and millisecond non-conducting squibs for detonation. The fresh air flow enters the stop working face from the middle section of the transport roadway through the patio and patio contact road on the side of the mine. The dirty wind passes through the patio contact road on the other side of the mine house and the patio enters the upper middle section transport (return air) roadway. The ore that has collapsed in the stopway relies on gravity to release about one-third of the ore deposit, and then performs the dome, flat field and secondary blasting work. After the recovery of the mining house, a large amount of ore mining work is organized to release all the ore remaining in the mine. The ore is loaded into the mine car through the funnel through the funnel. 2. Rock blasting: The rock in the stope is drilled with a 7655 air leg rock drill. The hole spacing and row spacing are 0.6-0.8m, the hole depth is 2.1m, and the blastholes are staggered. Manually installed No. 2 rock explosives, detonators and non-conducting blasters detonated. 3. Mining and mining: The ore is loaded into the mine by self-weighted manual gates for mining and mining.
(6) Mining and mining of the pillars and treatment of the goaf The pillars are collected by the caving method. In order to ensure the safety of the mining work of the pillars, before the large amount of ore mining in the mine, the blastholes in the mine room column and the top of the top are drilled, and all the ore in the mine is released, and then the column is blasted. Generally, the column is first exploded, and the top and bottom columns are post-exploded. At the same time as the pillars are harvested, the goaf should be treated in a planned manner by natural or forced collapse of the surrounding rock.
(7) Ventilation and dust-proof fresh air flow from the main shaft, the main lifting shaft, the stage transportation alley, the one-side patio, and the patio connecting road enter the stop working face, and the dirty wind passes through the other side patio connecting road, the patio, and the return air roadway. Return to the wind well. Ventilation in the stope should be supplemented by a local fan. Wet rock drilling is used in the pit; when the head is digging, the fan is used to ventilate the dust; when the rock is installed, the water is sprayed on the pile; the sluice gate and the unloading port are installed with a sprayer to reduce the dust; Wall treatment; underground workers wear dust masks.
(VIII) Mining loss rate and depletion rate According to the selected shallow hole mining and mining method, combined with the actual situation of small ore bodies in Baotou area, the ore recovery rate is generally around 92%, and the loss rate is about 8%.
Second, the application of shallow hole mining ore mining method (1) Small iron ore type and ore body shape in Baotou area The small ore deposit in Baotou area is generally of quartz type magnetite ore, and most of the industrial types are weak magnetic and iron. ore. Most of the ore deposits have ω(mFe)/ω(TFe) between 15% and 85%, which is mixed ore. The genetic type of the deposit is basically the metamorphic ferrosilicon of the sedimentary metamorphic iron deposit to form iron ore. The ore body generally exists in the hornblende slant gneiss, and the output is controlled by the stratum, which is layered, layered, lenticular, and the like. Most of the ore bodies are steeply inclined ore bodies, and the inclination angle is generally 60-85°. The thickness of the ore body is medium or very thin ore body, generally 3 to 20 m, mostly around 10 m.
(II) Surrounding rock conditions of the ore body The surrounding rock of the ore body is mainly mixed igneous hornbeam slant gneiss and black cloud hornbeam slant gneiss. There are generally less stones in the ore body. The boundary between the ore body and the surrounding rock and mezzanine is clear.
(III) Hydrogeological conditions The aquifers in each mining area of ​​Baotou area are mainly Quaternary alluvial aquifers and bedrock fissures and weak aquifers. The lithology of the Quaternary alluvial aquifer is a gravel layer, and the amount of water inflow is generally small (except for the Laigou iron ore). Most of the weak aquifers in bedrock fissures are slanted long-horned gneiss, granite, quartz diorite, etc. The weathering fissures are relatively developed, with good water permeability, but weak water. The topographic conditions of most mining areas are conducive to drainage, and the groundwater ditch directly receives vertical infiltration replenishment of atmospheric precipitation. In short, the small iron ore deposits in Baotou area are mainly filled with fissure water, the second is the void water, the water is weak, and the recharge conditions are poor. The natural drainage conditions are good. The hydrogeological exploration type of the deposit is the second type, the first type, ie hydrology. The geological conditions are simple.
(IV) Engineering geological conditions The fault structure of most mining areas is extremely undeveloped. The surrounding rock of the top and bottom of the ore body is a semi-hard-hard layered rock stratum with high tensile, compressive and shear strength and strong overall rock stability. There are basically no bad engineering geological problems. The geological type of deposit exploration engineering belongs to the second type, the first type, which is a mining area with simple engineering geological conditions dominated by hard rock layers. However, the long-term exposure of the rock mass is subject to weathering, and the surface weathering fissure is relatively developed, which causes the integrity of the rock mass to be destroyed, the mechanical strength is reduced, the stability is weakened, and the sliding is easy to occur, which is the main unfavorable factor for the mining.
(V) Environmental geological conditions According to Figure A1 of "China Earthquake Peak Acceleration Zoning Map" (GB18306-2001), the peak acceleration of Baotou area is 0.15~0.30g, and the contrast intensity is 7.5~8.5 degrees, all of which are seismic fortification areas. The ecological environment in Baotou is relatively fragile, and mining will change the natural topography of the area, destroying the recharge route and permeability of groundwater. Due to the lack of vegetation in most mining areas, the relative height difference of the topography is large, and the waste rock discharged from the mining is easy to form a small-scale debris flow during rainfall. Therefore, in the mining process, we must pay attention to the unified management and treatment of waste rock, waste residue and wastewater, strengthen the construction and protection of the ecological environment, and avoid pollution and damage to the environment as much as possible. The stratigraphic lithology of Baotou area is mainly composed of some low gamma value gneiss and magnetite quartzite. The variation of gamma value is relatively stable, and it is the area with low radioactive bottom value.
(VI) Adaptability According to the applicable conditions of the shallow hole mining and mining method, combined with the scale, shape, and occurrence of small mine ore bodies in Baotou area, as well as hydrological, engineering and environmental geological conditions, this method is very suitable for most small mines. The mining method is simple in process, easy to grasp, and has good safety. It is recommended to promote the use of the mine.
(VII) Current application status In the past two years, many small mines in Baotou area have adopted shallow hole mining and mining method in the production process. The application is better in Baiyindong No. 1 Iron Mine, No. 7 Iron Mine, No. 12 in Guyang County. Iron ore, No. 29 iron ore, Baotou Steel Guyang Mining Company Public Welfare Mingtie Mine, Guyang County Liuding Account Iron Mine, etc., the annual production scale of these mines is about 150,000 tons.
(8) Existing problems and suggestions 1. Although many small mines adopt the shallow hole mining and mining method, there are some that are not suitable for adopting this method, but the safety is poor, the mining volume is large, and the ore is used. For roadway mining methods with low recovery rates, it is recommended that these mines modify the mining method after investigating the mines with better application of the method. 2. In mines where this method has been applied, some applications are not standardized or unscientific and should be improved. For example, some mines are thicker and reach 20m. When the method is applied, no ore outlets are set up in the upper and lower plates of the ore body. The ore in the mine is not clean, resulting in waste of resources. Some mines did not return to the mining column in time after the end of ore mining in the mine, which also resulted in low resource recovery rate. 3. It is necessary to deal with the gobs in time. Most of the mines in the Baotou area that use the shallow hole mining and mining method did not deal with the goaf in time after the completion of a middle section, resulting in a large safety hazard. It is recommended that the mine should return to the mining column in time and collapse the surrounding rock to treat the goaf. After the collapse of the surrounding rock, the mine should set up fences around the subsidence area in time to prevent people, animals and vehicles from entering the city and causing safety accidents.

[ Techsearch ]  [ Join in collection ]  [ Tell your friends ]  [ Print this article ]  [ Illegal reporting ]  [ close window ]


Recommend Tech
Click rank

Thank you for your support, I will continue to work hard.!

Sweep code support
Say as much as you like.

openAlipayIf you sweep, you can get a reward for sweeping yards.

Website Homepage

About Us


Use Agreement

Copyright privacy


Service Items

Member Service

Advertising Services

Website Message

Four Privileges

Payment Method

Apple APP Download
Android App Download
Mining Club
Contact Us


We are always waiting for your visit!

| ICP business license: Shaanxi ICP No. 15507745